change: Instead of 22 sheets of 0.35mm lamination, they now use 40 sheets of only 0.2mm. See photos on previous page. This resulted in a considerable increase in production cost, but Pulso has maintained a more than reasonable price for the 2826/12 of only $63.30.
Motor Specifications of the 2826/12
Max. efficiency: 81% KV=760
No. of lipo cells: 3-5
Max. efficiency current: 15-25A(>75%)
Current Capacity: 37A(60S)
No load current: 1.1A
Internal resistance: 62m)
Motor Specifications of the 2826/12
Max. efficiency: 81% KV=760
No. of lipo cells: 3-
No load current: 1.1A
Internal resistance: 62m)
We used a wheel collar spacer between the collet and motor. No set screw was necessary. After all, It’s only a spacer
programming card shown below.
We think it is worth noting that Pulso owns all of the intellectual property rights to both its motors and ESCs, and both are manufactured in the Pulso factory.
We think it is worth noting that Pulso owns all of the intellectual property rights to both its motors and ESCs, and both are manufactured in the Pulso factory.
Pulso ESC programming card. Just plug it into the ESC and make choices.
Pulso 60am ESC. Opto coupled. No BEC. Programming card available.
We mounted the two ESCs in the wing directly behind the motors.
Pulso 60amp ESC:
The ESC we used is from the Pulso Advanced Series. They also offer a Master Series specifically for helicopters, cars and boats. Our ESC is opto coupled with no BEC. It is a
snap to program using the
The ESC we used is from the Pulso Advanced Series. They also offer a Master Series specifically for helicopters, cars and boats. Our ESC is opto coupled with no BEC. It is a
snap to program using the
